Zebra TC21/26

CRD-TC2Y-SE1ET-01 | Single Slot USB/Charging Cradle

• Connects to USB-C port and 2-pin charge contacts on bottom of TC21/TC26.
• Will charge Standard Capacity battery from 0 to 90% in less than 3 hours.
  Charges Extended Capacity battery from 0-90% in less than 4 hours.
• Compatible with TC21/TC26 units with hand strap or Pistol Grip Handle attached.
• Optional USB to Ethernet Module (MOD-MT2-EU1-01) can be used to convert to Ethernet enabled cradle.
• Does not use Zebra ShareCradle design.
• Does not charge spare battery.

MOD-MT2-EU1-01 | USB to Ethernet Module

• Attaches to Single Slot USB/Charging Cradle (CRD-TC2Y-SE1ET-01) to provide Ethernet support.
• Mechanical switch selects between micro-USB B port and RJ45 Ethernet jack.
• 10/100/1000 Mbps speed
• LEDs on module indicate connectivity and speed.

CRD-TC2Y-BS1CO-01 | Single Slot Base Charge-Only Cradle

• Connects to 2-pin Charge Connectors on bottom of TC21/TC26.
• Will charge Standard Capacity battery from 0 to 90% in less than 3 hours.
  Charges Extended Capacity battery from 0-90% in less than 4 hours.
• Compatible with TC21/TC26 units with hand strap or Pistol Grip Handle attached.
• Does not use Zebra ShareCradle design.
• Does not charge spare battery.

CRD-TC2Y-BS5CO-01 | 5-Slot Charge-Only ShareCradle

• Will charge up to five TC21/TC26 units.
• Will charge Standard Capacity battery from 0 to 90% in less than 3 hours.
  Charges Extended Capacity battery from 0-90% in less than 4 hours.
• Connects to 2-pin Charge Connectors on bottom of TC21/TC26.
• Compatible with TC21/TC26 units with hand strap or Pistol Grip Handle attached.
• Does not charge spare batteries
• Can be racked/ mounted in a standard 19 inch rack system via the mounting accessory (BRKT-SCRDSMRK-
  01).

CRD-TC2Y-BS54B-01 | 4-Slot Charge-Only ShareCradle with Spare Battery Charging

• Will charge up to four TC21/TC26 units and four spare batteries.
• Will charge Standard Capacity battery from 0 to 90% in less than 3 hours.
  Charges Extended Capacity battery from 0-90% in less than 4 hours.
• Connects to 2-pin Charge Connectors on bottom of TC21/TC26.
• Compatible with TC21/TC26 units with hand strap or Pistol Grip Handle attached.
• Can be racked/ mounted in a standard 19 inch rack system via the mounting accessory (BRKT-SCRDSMRK-01).

CRD-TC2Y-SE5ET-01 | 5-Slot Ethernet/Charging ShareCradle

• Allows network speeds up to 1 Gb
• Connects to USB-C connector and 2-pin charge contacts on bottom of TC21/TC26.
• Will charge up to five TC21/TC26 units.
• Will charge Standard Capacity battery from 0 to 90% in less than 3 hours.
  Charges Extended Capacity battery from 0-90% in less than 4 hours.
• Does not charge spare batteries
• Compatible with TC21/TC26 units with hand strap or Pistol Grip Handle attached.
• Can be racked/ mounted in a standard 19 inch rack system via the mounting accessory (BRKT-SCRDSMRK-01).

BRKT-SCRD-SMRK-01 |  5-Slot ShareCradle Mounting Bracket

• Allows for rack and wall mounting of one 5-Slot ShareCradle or up to four Single Slot ShareCradles. Also compatible with TC21/TC26 Single Slot Cradles which support the key-hole mounts for this bracket.
• Bracket can be mounted on standard 19" network rack or on a wall.
• Has cable routing slots and removable power supply tray that stores and conceals power supplies.
• Adjustable tabs & screw mounts for easy hanging/installation.
• Adjustable orientations: - 25° High Density (5-Slot Charge Only Cradle) - Horizontal (Single Slot Cradle or 4-Slot Battery Chargers)
• See the Bluetooth-Generic
  Accessories TAG for info on 3rd party
  Network Racks that can be used for mounting this bracket.

SAC-TC2Y-4SCHG-01 | 4-Slot Spare Battery Charger

• Charges up to four spare batteries.
• Standard Capacity batteries will charge from 0-90% in less than 3 hours. Extended Capacity batteries will charge from 0-90% in less than 4 hours.
• Can be used standalone or up to 4
  Chargers can be mounted on Mounting Bracket (BRKT-SCRD-SMRK-01)

SAC-TC2Y-20SCH-01 | 20-Slot Spare Battery Charger

• Charges up to 20 spare batteries.
• Standard Capacity batteries will charge from 0-90% in less than 3 hours. Extended Capacity batteries will
  charge from 0-90% in less than 4 hours.
• Can be racked/ mounted in a standard 19 inch rack system via the mounting accessory (BRKT-SCRDSMRK-
  01).

CBL-TC5X-USBC2A-01 | USB-C cable for Charging/Communication

• USB-A to USB-C cable
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base
  Charge-Only Cradle (CRD-TC2YBS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Cable length is 1.5M (~5 ft.)
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
• Can also be used to communicate with device without using a Cradle.

CBL-TC2X-USBC-01 | USB-C cable for Charging/Communication

• USB-A to USB-C cable
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge/Communication Cradle (CRDTC2Y-BS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Cable length is 1.5M (~5 ft.)
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
• Can also be used to communicate with device without using a Cradle.
  NOTE: Recommend using CBL-TC5XUSBC2A-01 which is a lower cost cable solution.

CBL-TC2Y-USBC90A-01 | USB-C cable with right angle connector for Charging/Communication

• USB-A to USB-C cable
• USB-A connector end has a 90° bend allowing cable to be used in tighter locations.
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge/Communication Cradle (CRDTC2Y- BS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Cable length is about 1.1M (45").
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
• Can also be used to communicate with device without using a Cradle.

USB-C cable for Charging/Communication

• USB-A to USB-C cable
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge-Only Cradle (CRD-TC2YBS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
• Can also be used to communicate with device without using a Cradle.

CBL-TC5X-USBC2A-01 | USB-C cable for Charging/Communication

• USB-A to USB-C cable
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge-Only Cradle (CRD-TC2YBS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Cable length is 1.5M (~5 ft.)
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
• Can also be used to communicate with device without using a Cradle.

CBL-TC2X-USBC-01 | USB-C cable for Charging/Communication

• USB-A to USB-C cable
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge/Communication Cradle (CRDTC2Y-BS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Cable length is 1.5M (~5 ft.)
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
• Can also be used to communicate with device without using a Cradle.
  NOTE: Recommend using CBL-TC5XUSBC2A-01 which is a lower cost cable solution.

USB-C cable for Charging/Communication

• USB-A to USB-C cable
• Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge-Only Cradle (CRD TC2YBS1CO-01).
• Can be used to charge the device via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter)
• Will charge battery in device from 0 to 90% in less than 3 hours using the walladapter 5V power supply or Cigarette Adapter.
  ►Can also be used to communicate
  with device without using a Cradle.

25-124330-01R | Single Slot Cradle to PC/Host USB cable

• Used with Single Slot USB/Communication Cradle (CRDTC2Y- SE1ET-01)
• Micro USB connection on cradle end

USB micro-A to USB A Female adapter

• Allows the TC21/TC26 to act as a USB host to connect to devices like USB flash drives/memory sticks, mice, etc.
• Connects to Single Slot USB Cradle (CRD-TC2Y-SE1ET-01)

TRG-TC2Y-SNP1-01 | Pistol Grip Trigger Handle

• Trigger Handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations.
• Easily attaches to TC21/TC26 top housing
• Easily removed to access battery
• Integrated 3-point stand for resting terminal when not in use
• Connects to I/O connector on rear of TC21/TC26. Requires TC21/TC26 with 2-pin or 10-pin I/O connector configuration.
• Can be used with optional Wrist Tether Strap (50-12500-066).
• Does not block view of rear facing camera
• Compatible with devices using Standard or Extended Capacity battery.

SG-TC2Y-HSTRP1-01 | Handstrap

• Strap attaches to back of TC21/TC26.
• Leather and Hypalon Pad provides maximum comfort and wear resistance.
• Adjustable Velcro design accomodates various hand sizes.
• Not compatible with Snap-on accessories (Trigger Handle).
• Compatible with devices using Standard or Extended Capacity battery.

SG-TC2Y-HLSTR1-01 | Soft Holster

• Vertical orientation with Open Bucket design to accommodate hand strap for easy insertion and removal.
• Non rotating for maximum durability.
• Opening at bottom of holster for providing drainage and route for audio from device's speaker.
• Compatible with devices using Standard or Extended Capacity battery.
• Also compatible with devices with Pistol Grip Trigger Handle attached.

SG-TC2Y-ARMNT-01 | Arm Mount

• Enables the TC21/TC26 to be mounted to the arm for hands free operation.
• Mount is designed to be used with RS5100 (or similar) ring scanner for hands-free scanning. Mount will not allow the device's scan buttons to be easily used.
• Mount can be rotated to use device in portrait or landscape mode.

50-12500-066 | Wrist Strap for Trigger Handle

• Attaches to bottom of Snap-on Pistol Grip Trigger Handle (TRG-TC2Y-SNP1-01)

CRD-TC2Y-VCH1-01 | Vehicle Holder

• Holds TC21/TC26 in vehicle installations.
• Suction cup for easy installation and removal.
• USB-C port on bottom of device is accessible for charging.
• Does not support Snap-On accessories (Pistol Grip Trigger Handle).
• Compatible with devices using Standard or Extended Capacity battery.

SG-STYLUS-TCX-MTL-03 (pack of 3) | Fiber Tipped Stylus

• Black Passive Stylus with Zebra logo
• 5” length
• Heavy duty - made from stainless steel and brass. No plastic parts - real pen feel.
• Can be used in rain.
• Micro-Knit Hybrid Mesh Fiber Tip provides silent, smooth gliding use.
• Big improvement over rubber tipped or plastic tipped stylus.
• Compatible with all capacitive touch screen devices.
• Can be tethered to device using KTTC7X-TETHR1-03 or SG-ET5XSLTETR-01.

Rubber or Plastic Stylus

• Not Available - Stylus is NOT supported on the TC21/TC26 series.
• Only Finger and light duty Glove mode is supported.
• Supported gloves:
  - Latex and Nitrile Gloves up to 5mils thick
  Example:
  - Ambi-dex® Food Grade Disposable Nitrile Glove,
  - Powder Free with Textured Grip - 4 Mil 63-532PF Latex
  - Nitrile 4 Knit Nylon Glove with Nitrile coating
  Example:
  - MaxiFlex® Elite™ Ultra Light Weight
  Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers 34-274
• Fiber Tipped Stylus (SG-STYLUS-TCXMTL-03) will work - does not require Stylus Mode on device.

SG-TC2Y-SCRNPT1-01 (single) | Screen Protector

• Tempered glass screen protector to provide an extra layer of ruggedness to the Gorilla Glass touch screen of the TC21/TC26.
• Provides an oleophobic layer to disperse finger oils.

ADP-USBC-35MM1-01 | USB-C to 3.5mm Adapter Cable

• Allows headsets with 3.5mm jack to be connected to the TC21/TC26.
• Adapter provides PTT button, volume up/volume down buttons.
• Adapter cable length is about 2.5 ft. (78 cm).
• Clip on rear of adapter allows cable to be wrapped for length management.
• PTT button functionality tested with the following headsets:
  - HDST-35MM-PTVP-01
  Other PTT headsets not listed may not work properly and their PTT button will not be detected. This includes: HDST-35MM-PTT1-01 and HDST-25MMPTVP-01.
• Allows many Google compliant 3.5mm “consumer" headphones to function as a PTT headset while still allowing the headphone's “play/call/pause” button to operate as normal.

HDST-35MM-PTVP-01 | PTT Headset (3.5mm Locking jack)

• For Push-To-Talk (PTT) applications
• Uses 3.5mm rugged jack that is keyed/collared for a locking failsafe connection. NOTE: TC21/TC26 does not support this locking connection.
• Rotating earpiece allows for right or left ear configuration
• Built-in cord wrap
• mono with microphone
• includes clip for attaching PTT button to clothing.
• Either the PTT button on the headset or the PTT button on the required USBC to 3.5mm Adapter (ADP-USBC-35MM1-01) can be used.

SL+1W-3.5WA | Workforce Audio SnapLock PTT Adapter Cable

• For Push-To-Talk (PTT) applications
• 3.5 mm jack
• Adapter cable provide SnapLock connector which accepts a variety of Workforce Audio's earpieces.
• includes clip for attaching PTT button to clothing.
• Need Workforce Audio to verify compatibility with USB-C Adapter.

HS2100 Rugged Wired Headset

• Built to handle the everyday inevitable drops
• Dustproof, sprayproof and waterproof
• Ready for the freezer and outdoor subzero temperatures
• Feather-light for extraordinary comfort
• Noise cancellation for a superior voice experience in the noisiest environments
• Detachable swivel boom minimizes costs.
• Swivelling boom mutes microphone allowing uses to prevent voice pick applications from recognizing non-voice pick conversations.
• User-replaceable pads and windscreens maximize comfort and hygiene.
• Can be used as a PTT headset when used with the required USB-C to 3.5mm Adapter (ADP-USBC-35MM1-01).

BlueParrott VR12 Wired Noise Cancelling Headset

• Audio accuracy for voice picking and other speech recognition applications.
• High quality durability stands up to allday, every-day use.
• Lightweight design is easy and comfortable to wear all day.
• Compatible with most major wearable computers and devices used in voicepicking environments.
• G type (GN Netcom) Quick Disconnect.
• Convertible design gives choice of over-the-head and behind-the-neck wearing styles

USB-C Headsets

• Headset connects via the bottom USBC connector on device.
• Must be Google certified USB-C headset.

CBL-HS2100-3MS1-01 | HS2100 Headset Standard Cable (3.5 mm jack)

• 3.5mm barrel jack connector
• For use with TC20, TC21/TC26, TC5X, TC7X, TC8X, or other devices using a 3.5mm barrel jack audio connector
• Cable is 43" (1.1 M) long
• Rugged cable with rugged connectors that are keyed/collared for a locking failsafe connection.
  NOTE: TC21/TC26 does not support this locking connection.
• Includes one clothing clip. Additional clips can be purchased separately.

ADP-35M-QDCBL1-01 | RCH50/RCH51 Quick Disconnect Headset Adapter Cable

• Connects RCH50/RCH51 headset (or headsets with Quick-Disconnect connector) to devices with 3-pole 3.5mm barrel jack connector.
• Cable features a rugged keyed/collared jack for a locking failsafe connection.
  NOTE: TC21/TC26 does not support this locking connection.

HS3100 Rugged Bluetooth Headset

• HD Voice, also known as Wide Band Audio, brings incredible audio clarity
• Built to handle the everyday inevitable drops
• Dustproof, sprayproof and waterproof
• Ready for the freezer and outdoor subzero temperatures
• Feather-light for extraordinary comfort
• Noise cancellation for a superior voice experience in the noisiest environments
• Swap batteries on the fly — without losing the Bluetooth connection
• Split-second tap-to-pair simplicity using NFC.
• Detachable swivel boom minimizes costs.
• Swivelling boom mutes microphone allowing uses to prevent voice pick applications from recognizing non-voice pick conversations.
• User-replaceable pads and windscreens maximize comfort and hygiene
• 15 hours of battery power

BlueParrott Bluetooth Headsets

• Various Bluetooth models available with options that include:
  - Blocking out 96% of background
  noise
  - Over 24 hours of talk time
  - NFC Tap to Pair capable
  - Bluetooth wireless range capable
  up to 300 ft.
  - Convertible wearing options: over
  the head, behind the neck.
  See BlueParrot site for model specific
  options.

Aina Push-To-Talk (PTT) Bluetooth Voice Responder Remote Speaker/Mic (RSM)

• Bluetooth speaker-microphone designed to work with different walkie talkie style Push-to-Talk applications, including Zebra PTT Pro (check with Zebra PTT Pro engineering team for current device/OS support).
• Includes clip for attaching device to closthing for lapel speaker/mic usage.
• Features several buttons which the application developers can assign to different functions.
• Users can remotely control functions such as push-to-talk, phone calls, channel switching and emergency alerts.
• Device is ruggedized, MIL-STD 810G and IP67.
• Long lasting battery designed for 24 hour approx battery life. Can be recharged via micro-USB port.
• Includes 3.5mm headset jack allowing headphones to be connected for keeping conversations more private.
• Can be easily paired to mobile computer using NFC tap-to-pair.

Wandfu H3 Push-To-Talk (PTT) Bluetooth Remote Speaker/Mic (RSM)

• Bluetooth speaker-microphone designed to work with different walkie talkie style Push-to-Talk applications, including Zebra PTT Pro (check with Zebra PTT Pro engineering team for current device/OS support).
• Includes clip for attaching device to closthing for lapel speaker/mic usage.
• Includes 3.5mm headset jack allowing headphones to be connected for keeping conversations more private.

Savox BTR-155 Bluetooth Remote Speaker/Mic (RSM)

• Bluetooth speaker-microphone designed to work with different walkie talkie style Push-to-Talk applications, including Zebra PTT Pro (check with Zebra PTT Pro engineering team for current device/OS support).
• Includes clip for attaching device to closthing for lapel speaker/mic usage.
• Rugged wireless speaker microphone, IP55.
• Allows cable-free movement
• Familiar speaker microphone functions; PTT and volume buttons
• Includes 2.5mm headset jack allowing headphones to be connected for keeping conversations more private.
• LED status indication
• High speaker volume
• Includes:
  - Savox RSM
  - Modular Wired earpiece
  - Wall Charger
  - USB Cable
  - Quick Start Guide
  - Carrying Strap

Savox Push-To-Talk (PTT) Bluetooth Headset

• Bluetooth headset designed to work with different walkie talkie style Push-to-Talk applications, including Zebra PTT
  Pro (check with Zebra PTT Pro engineering team for current device/OS support).
• Also operates as standard Bluetooth headset for taking phone calls.
• Device is lightweight and ruggedized, IP55.

CBL-DC-388A1-01 | DC Power Cord

• Used along with Power Supply PWRBGA12V50W0WW to power Single Slot
  Base USB/Charging Cradle (CRD-TC2YSE1ET-01) or 4-Slot Battery Charger (SAC-TC2Y-4SCHG-01).
• Cable length is 1.8 meters

PWR-BGA12V50W0WW | Power Supply

• Used to power Single Slot Base USB/Charging Cradle (CRD-TC2YSE1ET-01) or 4-Slot Battery Charger
  (SAC-TC2Y-4SCHG-01).
• 100-240 VAC,12V, 4.16A, 50W
• Provides US DOE Level VI compliance for power efficiency.
• Replaces PWRS-14000-148R

CBL-DC-381A1-01 | DC Power Cord

• Used to power 5-Slot ShareCradles when using Level VI Efficiency power supply (PWR-BGA12V108W0WW)
• This cable does not include the black extension release latch which is not required when used on Multi-Slot ShareCradles.

CBL-DC-382A1-01 | DC Power Cord

• Used to power 5-Slot ShareCradles when using Level VI Efficiency power supply (PWR-BGA12V108W0WW)
• Cable has black extension tab for releasing the cable from the back of the cradle. This isn't required when using Multi-Slot ShareCradles.
• CBL-DC-381A1-01 is the preferred cable to use with TC21/TC26 cradles.

CBL-DC-523A1-01 | 2-Way DC Y Power Cord

• Used to power two 4-Slot Battery Chargers from one Power Supply (PWRBGA12V108W0WW)

PWR-BGA12V108W0WW | Power Supply

• Replaces PWRS-14000-241R
• Used to power 5-Slot ShareCradles
• 9A, 108W
• Level VI Efficiency rated

23844-00-00R | AC Line Cord

• Used to power with Power Supplies
• This AC Line Cord is for use in North America. See the AC Line Cords by Country TAG for comparable line cords to use in other countries.

PWR-WUA5V12W0US | USB Power Supply
(US plug style)
PWR-WUA5V12W0GB
(UK plug style)
PWR-WUA5V12W0EU
(EU plug style)
PWR-WUA5V12W0AU
(Australia plug style)
PWR-WUA5V12W0CN
(China plug style)
PWR-WUA5V12W0IN
(India plug style)
PWR-WUA5V12W0KR
(Korea plug style)
PWR-WUA5V12W0BR
(Brazil plug style)

• Used with USB-C Cable to provide a lower cost charging solution than using a Cradle.
• Also used to power Single Slot
  Charge/Communication Base Cradle (CRD-TC2Y-BS1CO-01).
• Provides higher current (2.5A) for faster charging
• 100-240 VAC, 5 V, 2.5 A

CHG-AUTO-USB1-01 | USB Cigarette Lighter Adapter
CHG-AUTO-USB1-BR (for Brazil)

• Used with USB-C Cable to provide invehicle charging.
• Includes two USB A ports providing higher current (2.5A) for faster charging

BTRY-TC2Y-1XMA1-01 Standard Capacity Spare Battery with PowerPrecision (3100 mAh)
BTRY-TC2Y-1XMA1-BR
(for use in Brazil)
BTRY-TC2Y-1XMA1-IN
(for use in India)

BTRY-TC2Y-2XMA1-01 | Extended Capacity Spare Battery with PowerPrecision (5400 mAh)